– All items within this connector kit are genuine items sourced from authorized distributors. highly dynamic A fast pressure build-up enables short stopping distances for automatic emergency braking and covers future NCAP requirements. Be sure to order the correct kit based on the style of Pedal Travel Sensor Connector, and use the correct wiring pinout. With the iBooster, Bosch has developed a vacuum-independent, electromechanical brake booster that meets the demands of a modern braking system. – There are two versions of the Bosch iBooster Gen-1 and Gen-2. * To our knowledge CAN-Bus integration and custom tuning of the iBooster has not been achieved yet but we opted to include the additional pins and seals if you wish to experiment or if this becomes viable in the future.
10x – Small Pins for 0.35 – 0.50mm² wire and Seals for 1.2 – 1.6mm insulation diameter (4x for CAN-Bus*, 1 spare, see recommended wire).2x – Medium Pins for 1.50 – 2.50mm² wire and Seals for 2.0 – 2.7mm insulation diameter (1 spare, see recommended wire) Bosch iBooster Gen-2 Connector Kit Contents: 10x Small Pins for 0.35 0.50mm² wire and Seals for 1.2 1.6mm insulation diameter (4x for CAN-Bus, 1 spare, see recommended wire) To our knowledge CAN-Bus integration and custom tuning of the iBooster has not been achieved yet but we opted to include the additional pins and seals if.3x – Large Pins for 2.50 – 4.00mm² wire and Seals for 3.4 – 3.7mm insulation diameter (1 spare, see recommended wire).
Therefore the iBooster is an ideal component for many applications such as electric vehicle conversions (rather than using a vacuum pump), classic cars / muscle cars / hot rods (typically with manual brakes), limited vacuum pressure (such as diesel or turbo engines), or clearance issues of engine swaps (like the BMW E30 with a S54 engine).īosch iBooster Gen-1 Connector Kit Contents: The information from the Pedal Travel Sensor is used by the iBooster ECU to drive the electric motor which provides additional force towards the Master Cylinder. The iBooster is able to run in a fail-safe standalone mode with no other connections or communication to additional components needed besides voltage supply and chassis ground as the iBooster has an internal Pedal Travel Sensor that is externally wired to the iBooster ECU. The Bosch iBooster is an electromechanical brake booster (rather than vacuum assisted) primarily found on Electric Vehicles such as Tesla, but can also be found on other vehicles including ones with an Internal Combustion Engine.